Unfortunately, you can’t use the USB port for the Canon 70D to charge the camera. The reason for this is that the USB port can only be used for data transfer – it cannot transfer power to the camera. Fortunately, there are other ways to guarantee that your Canon 70D is well-powered and we show you how to ensure continuous power on your EOS The following cables are compatible with these cameras (as of May 2023). 1: Can be used with the PowerShot V10. 2: Can be used as a cable for data communication. Do not connect devices to supply power. 3: The transmission rate when Interface Cable IFC-100U is used is equivalent to SuperSpeed USB (USB 3.2 Gen 1). Use your Canon DSLR as a webcam with a USB cable connected to your Windows 10 computer! No capture card needed anymore, like the Elgato Camlink or the Elgato Step 1: USB DC-Coupler and Drive Cable. DC Couplers should be available for any camera that has a removable battery, with a small flap that will allow the cable to emerge from the camera battery door. Voltages will vary based on your cameras requirements. So get the right one for your camera! 03. Inov8 Universal Li‑ion Charger. The Inov8 Universal battery charger is ideal as a replacement, additional or single charger solution for all your camera, camcorder and mobile batteries. It’ll charge AA batteries, and its movable pins were able to successfully contact all our test camera batteries. . I have ordered this cheap adapter from Ali Express and it works perfectly well to charge the Canon G7X MIII through USB-C as well as to power the camera without needing any battery inside. Make sure you use a decent USB-C to USB-C cable when you do this! This seller also sells one along with the adapter which works well for me. 2. Insert the battery. 3. Lower the cover and hold it down as you slide it, until it clicks into the closed position . 4. With the camera turned off, open the cover . With the smaller plug of the included interface cable in the orientation shown, insert the plug fully into the camera terminal . 5. 5. Connect the large plug of the supplied interface cable into the USB port of your computer. For the location and direction of the USB port, refer to the computer User’s Manual. 6. With the < > mark on the plug facing the back of the camera, connect it to the camera’s terminal. 7. You could search for a mini-USB to type A data USB cable to use. The mini-USB connector on the camera is used for data transfer, while the HDMI connector is used for video output from the camera. As Ricky stated, if you only need to transfer image files to your computer, a card reader is a good solution. Press the < MENU > button to turn off the menu screen. 10. Set the camera’s power switch to < OFF >. How to Connect the Camera To a Computer Using a USB Cable. Use the provided interface cable or one from Canon. When connecting the interface cable, use the provided cable protector. Cable protector.

how to charge canon camera with usb cable